- Industri: Education; Oil & gas
- Number of terms: 4495
- Number of blossaries: 0
- Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
A device similar to a power swivel that is used in place of the rotary table to turn the drill stem.
Industry:Oil & gas
In cementing operations, pertaining to a cement plug that comes to rest on the float collar.
Industry:Oil & gas
An operation in which a specially blended liquid is pumped down a well and into a formation under pressure high enough to cause the formation to crack open, forming passages through which oil can flow into the wellbore.
Industry:Oil & gas
To release pipe that is stuck in the hole by running washover pipe. The washover pipe must have an outside diameter small enough to fit into the borehole but an inside diameter large enough to fit over the outside diameter of the stuck pipe. A rotary shoe, which cuts away the formation, mud, or whatever is sticking the pipe, is made up on the bottom joint of the washover pipe, and the assembly is lowered into the hole. Rotation of the assembly frees the stuck pipe. Several washovers may have to be made if the stuck portion is very long.
Industry:Oil & gas
Timbers wrapped with wire mesh or other retaining medium located below the crown to act as a cushion in the event the block is raised too far.
Industry:Oil & gas
A type of mechanical jar in which a fluid moving through a small opening slows the piston stroke while the crew stretches the work string. After the hydraulic delay, a release mechanism in the jar trips to allow a mandrel to spring up and deliver a sharp blow. Compare mechanical jar.
Industry:Oil & gas
1. the condition of being porous (such as a rock formation). 2. the ratio of the volume of empty space to the volume of solid rock in a formation, indicating how much fluid a rock can hold.
Industry:Oil & gas
An accessory used in fishing operations to go over the outside of tubing or drill pipe stuck in the hole because of cuttings, mud, and so forth, that have collected in the annulus. The washover pipe cleans the annular space and permits recovery of the pipe. It is sometimes called washpipe.
Industry:Oil & gas
A method of pumping oil from wells by using a downhole pump without sucker rods. Subsurface hydraulic pumps consist of two reciprocating pumps coupled and placed in the well. One pump functions as an engine and drives the other pump (the production pump). The downhole engine is usually operated by clean crude oil under under pressure (power oil) that is drawn from a power-oil settling tank by a triplex plunger pump on the surface. If a single string of tubing is used, power oil is pumped down the tubing string to the pump, which is seated in the string, and a mixture of power oil and produced fluid is returned through the casing-tubing annulus. If two parallel strings are used, one supplies power oil to the pump while the other returns the exhaust and produced oil to the surface. A hydraulic pump may be used to pump several wells from a central source.
Industry:Oil & gas
The assembly of tools run into the hole during fishing to perform a washover. A typical washover string consists of a washover back-off connector, several joints of washover pipe, and a rotary shoe.
Industry:Oil & gas
