- Industri: Education; Oil & gas
- Number of terms: 4495
- Number of blossaries: 0
- Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
The movement of drilling fluid out of the mud pits, down the drill stem, up the annulus, and back to the mud pits. See normal circulation, reverse circulation.
Industry:Oil & gas
The use of the energy that arises from the expansion of compressed gas in a reservoir to move crude oil to a wellbore. Also called depletion drive. See dissolved-gas drive, gas-cap drive, reservoir drive mechanism.
Industry:Oil & gas
The operation of hoisting the drill stem from and returning it to the wellbore.
Industry:Oil & gas
An accessory employed above a packer, to permit annulus-to-tubing circulation or vice versa.
Industry:Oil & gas
The injection of gas into a reservoir to maintain formation pressure by gas drive and to reduce the rate of decline of the original reservoir drive. One type of gas injection uses gas that does not mix (is not miscible) with the oil. Examples of these gases include natural gas, nitrogen, and flue gas. Another type uses gas that does mix (is miscible) with the oil. The gas may be naturally miscible or become miscible under high pressure. Examples of miscible gases include propane, methane enriched with other light hydrocarbons, methane under high pressure, and carbon dioxide under pressure. Frequently, water is also injected in alternating steps with the gas.
Industry:Oil & gas
Originally, an open pit dug in the ground to hold drilling fluid or waste materials discarded after the treatment of drilling mud. For some drilling operations, mud pits are used for suction to the mud pumps, settling of mud sediments, and storage of reserve mud. Steel tanks are much more commonly used for these purposes now, but they are still usually referred to as pits.
Industry:Oil & gas
A set of controls, usually placed on the rig floor, or elsewhere on location, that is manipulated to control the amount of drilling fluid being circulated through the choke manifold. This procedure is necessary when a kick is being circulated out of a well. See choke manifold.
Industry:Oil & gas
A well into which gas is injected for the purpose of maintaining or supplementing pressure in an oil reservoir.
Industry:Oil & gas
A large, high-pressure reciprocating pump used to circulate the mud on a drilling rig. A typical mud pump is a two or three-cylinder piston pump whose replaceable pistons travel in replaceable liners and are driven by a crankshaft actuated by an engine or a motor.
Industry:Oil & gas
The process of raising or lifting fluid from a well by injecting gas down the well through tubing or through the tubing-casing annulus. Injected gas aerates the fluid to make it exert less pressure than the formation does; the resulting higher formation pressure forces the fluid out of the wellbore. Gas may be injected continuously or intermittently, depending on the producing characteristics of the well and the arrangement of the gas-lift equipment.
Industry:Oil & gas
