- Industri: Government; Labor
- Number of terms: 77176
- Number of blossaries: 0
- Company Profile:
A professional who tends power shear that cuts metal objects, such as sheets, plates, billets or bars, to specified length. Respnsibilities include:
* Lifts workpiece manually, or by hoist or crane, to machine bed or roller table.
* Positions workpiece against side guides and end stops or aligns layout lines under shear blade.
* Starts machine that clamps workpiece and lowers blade to cut metal.
* May tend shear on production line where shear is fed by conveyor, such as automobile frame line or rolling mill.
* May position stops according to calibrated gauge on machine to shear to length such items as scrap, billets, or reinforcing rods.
* May verify size of sheared items, using tape measurer, caliper, or template.
* May shear metal to specified circular or curved dimensions.
* May be designated by type of shear as alligator-shear operator; gate-shear operator i; or by application of shear as hot-billet-shear operator; scrap-shear operator; square-shear operator ii.
Industry:Professional careers
A professional who tends swage machine that chokes (reduces) inside diameter of muzzle end of shotgun barrel to enable pellets or shot to concentrate when gun is fired. Respnsibilities include:
* Inserts and clamps shotgun barrel into holding device and starts machine that exerts contraction pressure on end of barrel to reduce inside diameter of barrel.
* Measures diameter of barrel bore, using dial gauge to verify that choke of barrel meets specification.
Industry:Professional careers
A professional who repairs and adjusts fiberglass sliver forming machines, applying knowledge of machine operation. Respnsibilities include:
* Examines machine parts to determine type of defect.
* Turns setscrews and nuts to align machine parts.
* Removes, replaces, and repairs worn or damaged parts, such as spiral traverses, fin coolers, graphite shoes, and binder applicators (sleeves), using handtools.
* Mounts graphite shoes on shaft and inserts shaft into chuck of turning lathe.
* Starts lathe and holds crocus cloth against shoes to remove nicks, dirt, and burs.
* Holds and turns spiral traverse against buffing wheel to smooth and clean traverse.
* Cleans glass and binder solution from binder applicators, using crocus cloth.
* Records and maintains production information, such as inventory of parts, and parts cleaned, changed, and adjusted.
Industry:Professional careers
A professional who supervises and coordinates activities of workers engaged in charging and heating slabs in reheating furnaces, rolling slabs into plates, and in laying out and cutting plates to specified sizes.
* Trains workers in operation of furnace.
* Inspects finished plates for conformance to job order specifications.
* Performs duties as described under supervisor master title.
Industry:Professional careers
A professional who replaces worn fiber, felt, leather, cork, or asbestos linings on shuttle box and shuttle binder: Removes lining by cutting lining with knife and punching out rivets, using hammer and punch.
* Smooths surface to be recovered, using file and sandpaper.
* Punches or drills holes in lining to match those in binder or box front, using hand punch or electric drill.
* Brushes glue on lining and rivets or screws lining to binder or box front, using riveting machine or screwdriver.
* Places binders and box fronts in vise or clamps to dry.
* Removes vise or clamps after glue has dried and trims and smooths lining, using knife and sandpaper.
* May replace linings on other loom parts, such as clutch plates and brake bands.
Industry:Professional careers
A professional who tends machines that wind, shape, or finish coiled and flat springs or wire forms to specifications. Respnsibilities include:
* Positions metal or wire blanks or coiled spring on jig press.
* Depresses pedal to lower shaping die that stamps out spring forms, or crimps, hooks, or loops ends of coiled springs.
* Presses and turns spring ends against rotating abrasive wheel to remove burs.
* Drills and taps holes in flat springs, using single-spindle drill press.
* Feeds wire through guides and onto mandrel of lathe-type automatic coil-winding machine that coils series of springs on mandrel.
* Cuts lead-in wire, using handcutters, and removes mandrel.
* Slides loop of flat metal stock over arbor of power-driven spring winder and starts machine to wind metal around arbor to form coiled-flat springs.
* Places retaining ring over wound spring to prevent unwinding.
* Measures springs for conformance to specifications, using gauges and micrometers.
* Inserts springs into holding device of double-disk grinder and places holding device between grinding wheels.
* Starts machine that automatically grinds spring ends.
* Removes springs.
* May be designated according to task performed as automatic-coil-winding-machine operator; double-end-production grinder.
Industry:Professional careers
A professional who tends machine that cuts and shapes wire to form metal heddles for textile machinery. Respnsibilities include:
* Mounts roll of wire on feeder mechanism and threads wire end through guides into machine.
* Starts machine and observes feed of wire into machine where wire is cut, swaged, and polished.
* Inspects finished heddles for specified dimensions, using gauges.
Industry:Professional careers
Jumlah pekerja yang dipekerjakan dalam bulan dibagi dengan jumlah pekerja yang bekerja dalam waktu atau menerima bayaran pada periode pembayaran yang termasuk bulan ke 12.
Industry:Labor
Mengacu pada upah dan gaji pekerja yang melaporkan bahwa mereka adalah anggota dari serikat pekerja atau asisiasi pekerja yang serupa sengan serikat.
Industry:Labor
Mengacu kepada orang-orang yang mengidentifikasi diri mereka dalam proses enumerasi sebaga orang Spanyol, Hispanik atau Latin.
Orang-orang etnik Hispanik atau Latin bisa berasal dari berbagai ras.
Industry:Labor
